BEFORE YOU START

PREP

Confirm the Matched Set

Check the panel code, colour and A / B / C / D sequence before installation. Keep the matched sheets together and clearly identify their intended left-to-right orientation.

PREP

Check the Substrate

Ensure the wall is structurally sound, clean, dry, stable and reasonably flat. Remove loose material, dust, grease and contaminants that may affect the fixing system.

PREP

Plan the Feature Wall

Identify the main viewing point, centreline, panel sequence, joint positions, trims, corners, power outlets and other penetrations before any cutting begins.

INSTALLATION STEPS

01

Measure & Set Out

Measure the wall carefully and mark the intended panel layout. Establish the centreline or other project datum so the mirrored pattern is positioned deliberately within the wall.

02

Dry-Lay the A / B / C / D Sequence

Lay the matched panels out in their intended order before cutting or fixing. Confirm the vein direction, mirror relationship and overall visual balance from the normal viewing distance.

03

Approve the Pattern Before Cutting

Once the dry layout is correct, photograph or mark the sequence and orientation. Avoid swapping, rotating or reversing panels after approval unless the complete pattern is reviewed again.

04

Prepare the Surface

Repair significant unevenness and ensure the substrate is clean, dry, stable and suitable for the selected fixing method. Existing wall finishes may remain where they are sound and compatible with installation.

05

Measure & Cut Carefully

Mark all cuts for wall edges, outlets, switches, doors, corners and other details while preserving the intended book-matched sequence. Recheck orientation before each cut.

06

Apply the Specified Fixing Method

Apply the suitable construction adhesive or fixing system specified for the substrate and project. Follow the current PDS installation guidance and the adhesive manufacturer's instructions.

07

Install in the Planned Sequence

Position the first reference panel accurately, check it is straight and plumb, then continue with the matching panels in the approved A / B / C / D sequence.

08

Align the Book-Matched Veins

Before the adhesive sets, step back and confirm the main vein lines align correctly across each joint. Make small positional adjustments where required to preserve the mirrored visual effect.

09

Finish Joints, Corners & Edges

Complete panel joints, internal corners, external corners and exposed edges using the appropriate PDS trims or project-specific finishing details.

10

Final Inspection & Cleaning

Check the complete pattern, panel alignment, joints and surface condition. Remove installation residue promptly, clean gently and allow adhesives or sealants to cure fully before normal use.

Prompt Cleaning

Wipe dust, spills and marks promptly with a clean, soft cloth. Regular light cleaning helps preserve the appearance of the decorative surface.

Mild Soap First

For fresh marks, start with a clean cloth dampened with a mild dish-soap solution or neutral cleaner. Wipe gently rather than scrubbing aggressively.

Use a Suitable Cleaner Carefully

For more persistent marks, use only a cleaner suitable for the panel finish and follow current PDS care guidance. Test first in an inconspicuous area where necessary.

Use Soft Materials

Use soft white cotton cloths, non-abrasive sponges or soft brushes. Avoid steel wool, abrasive pads and aggressive tools that may damage the decorative finish.

Avoid Harsh Abrasion

Do not over-clean, sand, scour or use harsh abrasive products, as repeated aggressive cleaning may dull or damage the surface finish.

Retain Panel Identification

For book-matched installations, keep records of the colour code and A / B / C / D sequence where possible. This helps with future project reference or replacement planning.

Review Physical Samples

Minor production-batch colour or pattern variation can occur. Review physical samples and matched panel sets before installation where exact visual coordination is critical.